Peraso’s X130 and X720 chipsets combine a multi-gigabit 802.11ad MAC/PHY baseband device with RFIC devices optimized for different applications.

The X130 chipset is a flexible solution for consumer electronics and enterprise network applications. The X720 chipset is a high-output power platform designed for outdoor applications such as Fixed Wireless Access.

The Peraso X720 Chipset

The Peraso X720 chipset is designed specifically for Fixed Wireless Access products, operating over the entire 57-71 GHz unlicensed band with unmatched transmit output power. By supporting frequencies from 66-71 GHz (802.11ay channels 5 and 6), the X720 chipset avoids the impact of atmospheric absorption that limits range in the lower part of the band. With 14 GHz of available spectrum, the X720 chipset is able to provide multi-gigabit per second throughput, and avoids the increasing interference problems experienced in the traditional 2.4 and 5 GHz Wi-Fi bands.

PRS4601 - 802.11ad Baseband IC

  • 802.11ad compliant PHY
    • Maximum data rate up to 4.62 Gb/s throughput
    • Single carrier MCS0 to MCS12 (16-QAM)
    • Variable rate LDPC FEC
    • Full support for beamforming and beam tracking
  • USB 2.0/3.0 (5 Gb/s) device controller with integrated PHY
  • 802.11ad compliant MAC
    • Two integrated RISC CPUs
    • On-chip memory for all packet buffering, control and management functions
    • Contention-based and scheduled access with highly programmable scheduler
    • Full support for A-MSDU, A-MPDU and Reverse Direction
    • 128-bit AES security (GCMP)
    • Highly configurable peripheral interfaces
  • 32 client support
  • Support for two connected radios
  • 24 configurable, multi-function, GPIOs
  • Windows, Linux and Android support
  • 7mm x 7mm BGA

 

 

PRS1165 - 60GHz Radio IC

  • RF chains: 16
  • Tx / Rx antenna ports: 16
  • Tx output power up to 24 dBm
  • Rx noise figure: 7dB
  • PLL tunes to channels 1 to 6 in half channel steps
  • Integrated crystal oscillator
  • Configurable filter for optimal 1/2 and 1/4 channel operation
  • Supports BPSK, QPSK, 16-QAM single carrier modulation
  • Baseband I/Q interface
  • 3 / 4-wire SPI and 10 GPIOs for configuration and control
  • 10mm × 13mm BGA

The Peraso X130 Chipset

The X130 chipset employs the PRS1145 and PRS4601 integrated circuits to implement a low cost, low power, high performance SuperSpeed USB 3.0 to 802.11ad 60 Ghz system. The X130 multi-gigabit throughput with the ability to power applications such as wireless AR/VR, wireless displays, wireless docking, and wireless access to the cloud can now be much more effective and efficient using WiGig technology.

PRS4601 – 802.11ad Baseband IC

  • 802.11ad compliant PHY
    • Maximum data rate up to 4.62 Gb/s throughput
    • Single carrier MCS0 to MCS12 (16-QAM)
    • Variable rate LDPC FEC
    • Full support for beamforming and beam tracking
  • USB 2.0/3.0 (5 Gb/s) device controller with integrated PHY
  • 802.11ad compliant MAC
    • Two integrated RISC CPUs
    • On-chip memory for all packet buffering, control and management functions
    • Contention-based and scheduled access with highly programmable scheduler
    • Full support for A-MSDU, A-MPDU and Reverse Direction
    • 128-bit AES security (GCMP)
    • Highly configurable peripheral interfaces
  • 32 client support
  • Support for two connected radios
  • 24 configurable, multi-function, GPIOs
  • Windows, Linux and Android support
  • 7mm x 7mm BGA

 

 

PRS1145 – 60GHz Phased Array RFIC

  • RF chains: 8
  • Tx / Rx antenna ports: 16
  • Tx output power: 15 dBm (QPSK), 13 dBm (16-QAM)
  • Rx noise figure: 7dB
  • PLL tunes to channels 1 – 4 of 802.11ad
  • Integrated crystal oscillator
  • Supports BPSK, QPSK, π/2-QPSK, 16-QAM single carrier modulation
  • Baseband I/Q interface
  • 3 / 4-wire SPI and 10 GPIOs for configuration and control
  • 10mm x 10mm BGA